National EAS Test — November 17, 2:20pm ET · it runs through the equipment FCC 47 CFR § 11.35(d) covers
Station Compliance

Station Compliance›FCC Watch

FCC Watch · Week of November 9, 2026

A mandatory Sage ENDEC update, and the FCC's reminder before the November 17 test

Sage released a mandatory 96-2 security update for the ENDEC on November 5. Install it before the November 17 test, then update ETRS Form One.

By Mark Shannon ·

If you run a Sage ENDEC, install the 96-2 update before November 17, then update Form One. Sage released it on November 5 and calls it mandatory under § 11.35(d). The details are under Equipment below.

The FCC has also issued its reminder for the National EAS Test. The Public Safety and Homeland Security Bureau's notice (DA 26-1190) confirms the date: Tuesday, November 17, at about 2:20 pm Eastern (11:20 am Pacific), with December 3 as the backup. Nothing about the schedule has changed.

We have found no fine issued under § 11.35(d), Broadcast Law Blog's roundup for November 1 to 6 lists no EAS enforcement action, and the Federal Register shows nothing new on EAS since October 30.

One thing to watch for: Broadcast Law Blog's post on the notice first went up with November 19 in its headline, and the web address still says so. The blog has corrected the title. November 17 is the test. November 19 is the Form Two deadline.

What the notice asks for

As Broadcast Law Blog reports it, the notice asks EAS Participants to do four things before the test:

Form One comes first

Two points from the blog's write-up are easy to miss:

What listeners will hear

FEMA says the test lasts about one minute and carries the standard alert tones. The message reads: "This is a nationwide test of the Emergency Alert System, issued by the Federal Emergency Management Agency. This is only a test. No action is required by the public." Stations may air it in English, Spanish or both.

Software EAS

No Commission action that we could find. The record closed September 29. The October 5 entry covers who said what.

Equipment: a mandatory Sage ENDEC update

Sage released version 96-2 (also written 96-02) for the Digital ENDEC 3644 on November 5. It is free, it is for U.S. units running Rev96 or Rev96-1, and Sage calls it mandatory. It removes compromised eMudhra root certificates the ENDEC uses for secure connections to alert audio servers. Sage's own notice cites § 11.35(d)(2), the part of the rule that requires security updates to be installed promptly once they are available. It also fixes email attachment problems with some mail servers and allows "&" and "+" in web passwords.

SBE's earlier minimums from the October 12 entry were Sage ENDEC 96.00 and DASDEC 54.00. A Sage unit at 96.00 or 96-1 meets that floor but still needs 96-2. We found no new DASDEC advisory and no reported compromises of broadcast equipment between November 2 and November 9.

What is next

Date What
November 17 National EAS Test, about 2:20 pm Eastern (backup date December 3). ETRS Forms Two and Three open.
November 19 ETRS Form Two, by 2:20 pm Eastern
January 4, 2027 ETRS Form Three

Get told when the FCC moves

The rules on this site change without warning — a deadline gets waived, a filing window opens, a Public Notice lands on a Friday. Leave an address and you get an email when something changes that affects a small station. Nothing else, and one click to leave.

Free. No pitch. Your address is not sold or shared. One click to leave.

Still working through § 11.35(d)?

The Program Chain Compliance Kit is the implementation version — the device-by-device reference, the network patterns for a one-rack station, and the worksheets that leave a paper trail behind the work.

See the kit — $149